incl. VAT plus shipping costs
Delivery time: 3-5 days
The HRT 6007 is an electronic floor-temperature controller without timer function.
Applications include electric heaters (direct heating systems, space heaters, temperature systems, heating pads, etc.) and floor warm water heating systems (the latter via thermal actuators, normally closed).
The floor-temperature controller HRT 6007 enables set the target floor temperature to with the setting wheel. The heating operation is indicated by LED. The red LED lights up as long as the controller has switched on the heating.
Delivered the HRT 6007 – floor-temperature controller without timer function with HRT frame (50x50 standard). This makes the controller integrated into most programs leading switch manufacturers. On request delivery with Busch-Jaeger-frame, Reflex SI program.
The temperature control device is delivered with a floor sensor.
Weight 70 g Dimensions 36 × 80 × 80 cm temperature range
10 – 60 °C, 10 – 40 °C
230 V ~ ± 10%, 50 Hz
switching current (max.) approximately
12 (4) A
switching temperature difference
NTC acc. to DIN 44574
perm. ambient temperature
-10 – +40 °C
degree of protection
continuous operation, manual mode
opens at overtemperature
with the heating switched on
floor temperature control
on / off switch, setting wheel
floor sensor ntc
02 kOhm / HRT sensor, floor sensor hrt included
temperature sensor cable
4 m long, max. diameter 8 mm
weight of the floor sensor
creme white, pure white
50 x 50 mm, with intermediate frame