incl. VAT plus shipping costs
Delivery time: 3-5 days
The HRT 6015 is an electronic universal controller with timer function. The temperature control can be set as:
- room-temperature controller
- floor-temperature controller
- room-temperature controller with floor temperature monitoring.
Applications include electric heaters (direct heating systems, space heaters, temperature systems, heating pads, etc.) and warm water heating systems (the latter via thermal actuators, normally closed).
On an internal coding the use of the universal controller as a room-temperature controller, a room-temperature controller with floor temperature monitoring or as a floor-temperature controller can be set.
Four standard programs preprogrammed by the factory and a custom program can be called up in a matter of seconds. Any number of warm times per day can be programmed in the own program. In the standard programs include one or two warm phases per day e.g. between 6 a.m. and 10 p.m. in the living room or from 6 to 9 a.m. and 5 to 10 p.m. for a bathroom. The temperature is lowered between the specified times. The target room temperature can be adjusted at any time during operation with the wheel. The timer function is switched off, allowing the device to constant warm temperature controls set with the setting wheel (continuous operation). The red LED lights up as long as the controller has switched on the heating.
The temperature reduction to which the controller reduces the target temperature is adjustable to own needs. The universal controller has a self-learning function.
As a room temperature controller with floor monitoring for exceeding limit values, a remote sensor monitors compliance with the maximum permissible temperature on the heating in the floor.
Delivered the HRT 6015 – room-temperature controller with HRT frame (50x50 standard). This makes the controller integrated into most programs leading switch manufacturers. On request delivery with Busch-Jaeger-frame, Reflex SI program.
The temperature control device is delivered with a floor sensor.
Weight 91 g Dimensions 40 × 80 × 80 cm temperature range
10 – 60 °C, 5 – 30 °C, 5 – 30 °C / 20 – 40 °C
room controller version
5 – 30 °C
floor controller version
10 – 60 °C
20 – 40 °C
clock display small
230 V ~ ± 10%, 50 Hz
switching current (max.) approximately
12 (4) A
max. connection option
to 18 m² heating mats (150 W/m²) connectable
opens at overtemperature
switching temperature difference
NTC acc. to DIN 44574
perm. ambient temperature
-10 – +40 °C
degree of protection
automatic mode, automatic timing, continuous operation, floor temperature monitoring, manual mode, teach-in function, temperature reduction
comfort times block-programming, comfort times single-day-programming, user-specific own-programs
with the heating switched on
clock display, temperature
floor temperature control, monitoring, room temperature control, room temperature control with floor monitoring, universal temperature controller
comfort times block-programming, comfort times single-day-programming
keys, on / off switch, setting wheel
room sensor included
floor sensor ntc
02 kOhm / HRT sensor, floor sensor hrt included
temperature sensor cable
4 m long, max. diameter 8 mm
weight of the floor sensor
71 x 71 x 41 mm
80 x 80 mm
creme white, pure white
50 x 50 mm, with intermediate frame