Products
6115 Ecotimer M
-
Description
The HRT 6115 is an electronic room-temperature controller 5 to 30 °C with timer function and concurrently floor temperature monitoring and large backlit display. Applications include electric heaters (direct heating systems, space heaters, temperature systems, heating pads, etc.) and warm water heating systems (the latter via thermal actuators, normally closed). The room-temperature HRT 6115 controller with floor monitoring has an internal temperature sensor and an additional flexible floor sensor. The controlled variable is the room temperature. The temperature controller monitored by floor sensors compliance with the maximum permissible temperature at the heating in the floor The room-temperature controller HRT 6115 with floor monitoring allows one or two warm phases per day, e.g. between 6 a.m. and 10 p.m. in the living room or 6 to 9 a.m. and 5 to 10 p.m. for a bathroom. The temperature is lowered between the specified times. The actual room temperature is constantly displayed numerically on the display. The target room temperature is shown as a ramp at the bottom of the display. You may be in operation during the warm periods at any time by pressing the + or – buttons to be changed. The temperature reduction to which the controller reduces the setpoint temperature is adjustable to own needs. The same applies when defining the upper limit of the floor temperature. Block or single-day programming is possible. The timer function is switched off, allowing the device to constant warm temperature controls (continuous operation). Delivered the HRT 6115 – room-temperature controller with HRT frame (50×50 standard). This makes the controller integrated into most programs leading switch manufacturers. The temperature control device is delivered with a floor sensor. -
Additional information
Weight 86 g Dimensions 40 × 80 × 80 cm temperature range 5 – 30 °C / 20 – 40 °C
display type with display
lighting green
mains voltage 230 V ~ ± 10%, 50 Hz
switching current (max.) approximately 12 (4) A
switching power 2,7 kW
switching temperature difference 0,7 K
temperature sensor NTC acc. to DIN 44574
perm. ambient temperature -10 – +40 °C
connection cables 2,5 mm²
degree of protection IP 30
energy class VII
energy efficiency 3,5%
frost protection from 5 °C
functions automatic mode, automatic timing, continuous operation, floor temperature monitoring, frost protection, manual mode, temperature reduction
additional functions comfort times block-programming, comfort times single-day-programming, daylight saving time, keypad lock
display values clock display, floor temperature display, temperature, weekday
property energy efficiency high, environmental consciousness
control monitoring, room temperature control with floor monitoring
operation comfort times block-programming, comfort times single-day-programming
operating element keys
room sensor room sensor included
floor sensor ntc 02 kOhm / HRT sensor, floor sensor hrt included
temperature sensor cable 4 m long, max. diameter 8 mm
weight of the floor sensor 140 g
housing dimensions 71 x 71 x 41 mm
frame dimensions 80 x 80 mm
color creme white, pure white, studio white
compatibility 50 x 50 mm, with intermediate frame
-
-
-
—
-
—
-
—
-
—
-
—
-
More matching products
-
Frame
3,15 € – 6,25 €incl. VAT
plus shipping costs
Delivery time: 3-5
-
Floor sensor
6,90 € – 15,90 €incl. VAT
plus shipping costs
Delivery time: 3-5
-
Cover disc M
5,95 €incl. VAT
plus shipping costs
Delivery time: 3-5
